Tactical Scorpion Level III+ Body Armor Pair 10x12 Curved - Lighter Than AR500

Description

Tactical Scorpion Level III+ Lightweight Body Armor Plates
DEPARTMENT OF JUSTICE / NATIONAL INSTITUTE OF JUSTICE COMPLIANT BODY ARMOR
Tactical Scorpion Gear Level III+ steel plate armor . (Made in the USA)
We are Compliant with all NIJ standards so dont pay more for lesser quality products .
A stand alone armor plate with multiple hit capability – Easily passed NIJ.0.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) and 5.56 XP193 55 Grain FMJ boattail . In house testing defeated 30-06 165 grain copper tip trophy.
Base coat is fully encapsulated with 40 mils to protect against corrosion, chemicals and sweat
Optional Spall coat ( build-up) is 225 mils .20″ thick on strike face
Will fit most common carrier vests ( We manufacturer a full line of carrier vests)
Laser cut
Fully tested by independent Lab to 6 shot stand alone tests against 5.56 M855 M80 ball (green tip) and 5.56 XP193 55 Grain FMJ boat tail
For front and/or back protection
Simply Stronger, Thinner and lighter that the competition
Our new proprietary ballistic steel core is far stronger than the AR500 – AR650 steel core. This core is hardened all the way through unlike the AR500 – AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength.
Our build-up spall coating is done with a Graco EXP-2 which is the top of the line high pressure heated coating system. Our plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot which keeps the shrapnel from escaping from the armored assembly
We utilize a CNC laser cutting table for the cutting of all our Armor products. If the seller of armor plate does not mention how its cut, then you can guarantee its not by laser
There is no equal method
Plasma cutting cuts slowly, this puts a lot of heat into the steel. ( Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it’s edges. The
heat-affected zone
(HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods.
Our Curved plate is formed on a custom laser cut die set with single radius bend on a custom built Omron computer controlled hydraulic press guaranteeing a perfect formed plate each time.
Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed in stock and ready for immediate shipping.
Weights : All weights are in pounds
Level III+ lightweight spall coated
6x6: 39 ounces
6x8: 52 ounces
8x10: 80 ounces
10x12: 119 ounces
10x12 modified: 104 ounces
11x14: 157 ounces
Level III+ lightweight base coated
6x6: 33 ounces
6x8: 44 ounces
8x10: 70 ounces
10x12: 103 ounces
10x12 modified: 88 ounces
11x14: 138 ounces
Coated with Super strong hybrid polyurea for the protection of the steel.
Tested by HP White laboratory
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
NIJ tested Level III+ Armor
We only manufacture our plates from certified  steel with a Brinnell Hardness Rating of
610- 630 BHN
TERMS AND CONDITIONS
By purchasing the body armor contained in this listing from East West Consolidated, LLC, d/b/a Tactical Scorpion Gear (“Seller”), you (“Purchaser”) agree to be bound by the following terms and conditions:
1) Purchaser represents that s/he is at least 18 years old or the age of majority in the State or Territory in which s/he resides.
2) Purchaser is not a convicted felon at the time of purchase.
3) Seller will not sell body armor to any citizen or resident of the State of Connecticut.
4) Purchaser is legally allowed to purchase, possess, and/or use the purchased item(s) in Purchaser’s State/Territory, County/Parish, and municipality, and affirms that such purchase does not violate any federal, state, or local laws.
5) Seller makes no representations to Purchaser about the legality of any Purchase of body armor. Seller makes no representations about the consequences to Purchaser in the event Purchaser buys the body armor in contravention of any applicable federal, state, or local law. Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws.
6) Seller is not responsible for Purchaser’s violation of any federal, state, or local law concerning the Purchaser’s purchase, use, re-sale, other distribution of any body armor obtained from Seller. This disclaimer applies to any re-distribution within or outside of the United States.
7) Seller will cooperate with any federal, state, or local law enforcement agency investigating the purchase or use of body armor by the Purchaser.
8) Purchaser is not buying the body armor on behalf of another person in an effort to avoid compliance with these Terms and Conditions or to circumvent any applicable federal, state, or local law.
9) Although Seller’s body armor is tested to withstand bullets, the armor is bullet resistant and not bulletproof. Body armor will not protect someone from injury or death in all circumstances. Body armor will not provide any protection for the parts not covered by the armor. Purchaser acknowledges that there is always a risk of injury, including serious injury or death, if struck by a bullet while wearing body armor.
10) To the fullest extent permitted by law, Purchaser and his/her heirs, assigns, successors, and agents agree that Seller is not liable for any injury, including serious injury or death, that may occur during the use of Seller’s body armor. To that end, Purchaser and his/her heirs, assigns, successors, and agents, release, discharge, indemnify, and hold harmless Seller for any liability from the purchase, possession, or use of the body armor. Purchaser and his/her heirs, assigns successors, and agents specifically disclaim any right to any damages from Seller, including compensatory damages, incidental damages, consequential damages, punitive damages, costs, and attorney’s fees.
11) Any statements, images, or descriptions of body gear herein, including all photographic and video depictions, are for informational purposes only, and do not constitute a warranty of the products in any way.
12) Seller specifically disavows and disclaims any representation, implied or express warranty, or liability related to the condition or use of the items sold. Every item is sold AS IS and WITH ALL FAULTS. BUYER ASSUMES ALL RISK AS TO THE QUALITY AND PERFORMANCE OF THE PRODUCT.
ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED. NO ORAL AGREEMENTS OR WARRANTIES OF ANY KIND SHALL BE BINDING UNLESS IN WRITING AND SIGNED BY SELLER.
The Terms and Conditions are effective as to the Purchaser on the date of the purchase of the body armor and supersede all prior oral or written Terms and Conditions between Purchaser and Seller.
These Terms and Conditions may be updated, revised, or changed without prior notice.